You are in Rotax Engine Servicing, Tuning, & Dyno Testing

Rotax Engine Servicing

Rotax Engine Servicing


Spellfame are delighted to recommend BRT for all Rotax engine servicing. BRT are an approved Rotax Sealing Agent with 25 years experience of building race winning engines. You can also contact Adrian at BRT on 01384 75664.

We have listed below the popular rebuilds BRT offer. This allows you to select what work you want carried out on your engine and ancilleries. The prices shown are dependant on the condition of the engine. If any additional work maybe required BRT will contact you to obtain approval before any work is carried out.

Your engine will be returned to you with a bag containing all of the parts BRT have changed during the rebuild. We will ship your engine to you by next day courier, or you can collect it from BRT or Spellfame's premises, or we can deliver it to Whilton Mill, Rissington, Kimbolton or Shenington circuits.

How to buy your rebuild online:

Select from the list below and add to your basket the service items you would like BRT to carry out on your engine. For example if you want a Top End Rebuild, a Power Valve Service and a Dyno Test select each item and Add to Basket.

The prices listed below include the cost of returning your engine or part to you.

You may deliver your engine to BRT or Spellfame in person, or send it by courier to BRT. Please remember to securely attach your engine log book to your engine before sending.



Rotax Top End Rebuild & Re-Seal

Rotax Top End Rebuild & Re-Seal

The top end rebuild and re-sealing of Rotax Max, Junior Max or Mini Max includes labour and the following genuine Rotax new parts:

- New Base Gasket
- New Exhaust Flange Gasket
- New Reed Valve Gasket
- New "O" Ring Set
- New Reed Petals
- New Piston Pin
- New Piston, Piston Ring, Circlips
- New Small End Bearing
- Hone of barrel
- Pressure test engine
- Measure Engine to Rotax Specification and Re-seal


Price: £198.00
(EX VAT at 20%)

Quantity:




Rotax Full Rebuild & Re-Seal (Excluding Connecting Rod)

Rotax Full Rebuild & Re-Seal (Excluding Connecting Rod)

The full rebuild and re-sealing of Rotax Max, Junior Max or Mini Max includes labour and the following genuine Rotax new parts. Please note this rebuild excludes the replacement of the connecting rod. We normally recommend the connecting rod is replaced after approximately 25 hours use.

- New Base Gasket
- New Exhaust Flange Gasket
- New Reed Valve Gasket
- New "O" Ring Set
- New Reed Petals
- New Balance Gears, Idle Gear and Circlips
- Replacement of Gear Oil
- New Crankcase Gasket and Seal kit
- New Balance Shaft Bearings
- New Main Bearings
- New Small End Bearing
- New Piston Pin
- New Piston, Piston Ring and Circlips
- Hone of barrel
- Check crankshaft for alignment
- Pressure test engine
- Ultrasonic clean whole engine
- Measure Engine to Rotax Specification and Re-seal


Price: £358.00
(EX VAT at 20%)

Quantity:




Rotax Full Rebuild & Re-Seal (Including Connecting Rod)

Rotax Full Rebuild & Re-Seal (Including Connecting Rod)

The full rebuild and re-sealing of Rotax Max, Junior Max or Mini Max includes labour and the following genuine Rotax new parts. Please note this rebuild includes the replacement of the connecting rod.

- New Base Gasket
- New Exhaust Flange Gasket
- New Reed Valve Gasket
- New "O" Ring Set
- New Reed Petals
- New Balance Gears, Idle Gear and Circlips
- Replacement of Gear Oil
- New Crankcase Gasket and Seal kit
- New Balance Shaft Bearings
- New Main Bearings
- New Small End Bearing
- New Piston Pin
- New Piston, Piston Ring and Circlips
- New Connecting Rod
- Hone of barrel
- Check crankshaft for alignment
- Pressure test engine
- Ultrasonic clean whole engine
- Measure Engine to Rotax Specification and Re-seal


Price: £493.00
(EX VAT at 20%)

Quantity:




Rotax Fiche / Blueprint

Rotax Fiche / Blueprint

The BRT Rotax Fiche uses all of BRT's expertise to maximise the performance of your engine within the Rotax Specification. This item must be bought with either a Top End or a Full Rebuild.


Price: £100.00
(EX VAT at 20%)

Quantity:




Rotax Engine Dyno Test & Run-In

Rotax Engine Dyno Test & Run-In

Have your engine run-in after a rebuild to save you time running the engine in at track. Also BRT will power test your engine producing a printed power curve for you to examine.


Price: £50.00
(EX VAT at 20%)

Quantity:




Rotax Power Valve Set-up & Rebuild

Rotax Power Valve Set-up & Rebuild

Includes:
- Ultrasonic clean
- New Bellows, Gasket and Piston
- Set-up to our fiche


Price: £22.00
(EX VAT at 20%)

Quantity:




Rotax Carburettor Ultrasonic Clean & Set-up

Rotax Carburettor Ultrasonic Clean & Set-up

Carburettor will be completely stripped and cleaned in an ultrasonic tank. This includes a new float bowl gasket and return postage.


Price: £22.50
(EX VAT at 20%)

Quantity:




Rotax Starter Motor Rebuild Service

Rotax Starter Motor Rebuild Service

If your Rotax Starter has stopped working send it to us for repair. We will replace the brushes, springs and bearings with genuine Rotax parts and test the motor.

Price includes return postage. Please note we can only rebuild genuine Rotax starter motors.


Price: £22.50
(EX VAT at 20%)

Quantity:



Spellfame Store > Rotax Engine Servicing, Tuning, & Dyno Testing
SpellFame Karting & Kart Shop for Rotax Engine Servicing, Tuning, & Dyno Testing
34 Huxley Close, Park Farm Ind. Est., Wellingborough, NN8 6AB. UK
Phone (01933) 679810 Fax (01933) 403851 Contact Us
Best prices and Free postage on Rotax Engine Servicing, Tuning, & Dyno Testing
Kart Spares, Race Team and Training at Kimbolton, Rissington, Shenington and Whilton Mill circuits

Valid CSS!